Juniper Systems Allegro CE Manual User Manual

Page 32

Advertising
background image

Page 2-20 Hardware Features

4) Slide the latches downward until they cannot slide any further to

securely latch the battery door closed.

Do not turn on the Allegro yet.

5) Plug the AC wall charger that came with the Allegro into the wall

socket.

The small green light on the wall charger turns on when it is
plugged in.

6) Remove the rubber protector from the Allegro’s external power

input jack.

7) Plug the power connector end of the wall charger into the Allegro.

8) Charge the battery pack at room temperature until the charge

indicator on the Allegro turns off. This can take 3 to 5 hours the
first time you charge the battery.

Advertising