Juniper Systems TK6000 User Guide User Manual
Page 18
18
Field PC Owner’s Manual
Communication Ports
The Field PC has the following communication ports located at
the top of the case:
Two 9 pin serial port (COM 1 and COM 2)
USB A (host) port
USB B mini (client) port
Powering Off, Suspending, Resetting, and Restoring
Factory Defaults
The Power button allows you to suspend, power off, or reset the
device. A series of keyboard actions also lets you restore the
hard drive, settings, and icons to their original factory defaults.
Below are instructions for each action.
Powering Off the Device
When the device is powered off, it closes all programs and
powers down all system components except for the real-time
clock. Unlike suspend mode, the device resets when it is
powered on again. Any unsaved data will be lost.
To preserve battery power, we re/commend you power off the
device if it will be left unused for two weeks or longer.
To power off the Field PC,
1. Save all open files and close any running programs.
2. Press and hold the Power button until the Power Button
menu appears.