Juniper Systems TK6000 User Guide - Manual (Page 42)


Field PC Owner’s Manual
4. The Add a Device screen appears. Tap on the name of the
device you want to set up as an outgoing port.
5. Select a numbered COM port from the list of ports that
appear. If the port cannot be created, it is in use. Select a
different numbered port.
6. important: Deselect the Secure Connection option below
the list of COM ports, as shown above. Deselecting this
option ensures that the device disconnects its Bluetooth
connection only when you tell it to.
7. Tap Finish.
Once the virtual COM port is assigned using the outgoing
Bluetooth COM port, specify the COM port assignment within
your application as explained in the user documentation for the
application. An example follows.
Suppose you are using a Bluetooth-enabled GPS receiver with
the device and a navigation program on the Field PC. In this