Juniper Systems TK6000 User Guide - Manual (Page 41)

An incoming COM port means that the other device is initiating
the communication with the Field PC. For example, a desktop
computer might initiate a Bluetooth ActiveSync connection with
the device via the virtual COM port.
For more details about setting up outgoing and incoming COM
Ports, read the following sections.
Set up an Outgoing Bluetooth COM Port
Use this option if you want to assign the virtual COM port as
an outgoing COM port (i.e., you want to use the Field PC to
initiate communications with another device).
Follow the steps below to set up an outgoing Bluetooth COM port.
1. Make sure you have paired with the serial port device you
want to communicate with. To do this, follow the steps in the
section called Create a Bluetooth partnership in this chapter.
2. Select the COM Ports tab.
3. Tap New Outgoing Port, the second option shown.
Ch 5 Bluetooth® Wireless Communications
1