LABEC M-TIT-5 - Manual (Page 18)

At this time user can press ‘Exit’ to continue feeding or press ‘Enter’ to terminate feeding, meter
returns to starting status automatically.
6. Cleaning
In starting status, press ‘Clean’ button, meter displays as follows:
View Titrate Mode Set Calibrate
Titration panel READY
Feed
Clean
Titrate
Start cleaning
Cleaning
Number of cleaning times
05
Diag.26 Set number of cleaning times in titration panel
User can set cleaning times at mostly 10 times. When setting finished, press ‘Start cleaning’ button
to start, shown as follows:
View Titrate Mode Set Calibrate
Titration panel Down
Feed
Clean
Titrate
Cleaning
Number of cleaning times …… 05
Number
01
time of cleaning
End
Diag.27 Cleaning in titration panel
When cleaning is finished, meter returns back to starting status automatically and the same user can
terminate it in the process of cleaning at any time.
7. Titration
The meter provides 5 kind of titration modes: pre-titration, preset end point titration, mode
titration, manual titration and blank titration. In starting status, press ‘Titrate’ button or press
‘Titrate’ in menu, meter shows all titration modes, user can select needed titration mode for
17