LABEC M-TIT-5 - Manual (Page 36)

Note: Before printing, user must set the type of printer, parameter of communication baud ratio and
connect printer correctly. (see ‘Set Print’ chapter)
8.1.5.1 Print Titration Result
Meter will print out the name of current titration, titration time, titration parameter and
titration result.
8.1.5.2 Print Titration Data
Meter will print out all titration data
8.1.5.3 Print Titration Curve
Meter will print out titration curve according to titration curve graph.
8.1.6 About
When titration finished, meter will save some parameter used in current titration automatically,
including current titration name, total titration time, type of burette used, burette coefficient
and electrode slope. User could press ‘About’ button in menu and then press ‘Enter’ to view the
titration parameter. Displayed as follows:
Store Mode Concentration End point Print About
Titration Parameter
Titration Mode: Pre-titration
Titration Time: 00:05:56
Burette: 10mL
Burette coefficient:100.00%
Electrode slope: 100.0%
Diag. 45 Titration Parameter Display
8.2 View and Print Stored Data
In starting status, press ‘View’ in menu, select ‘View Stored Data’ and press ‘Enter’ to view the
stored titration data, displayed as follows. In view stored data, user is only allowed to print
stored titration data and view the parameter in titration.
35