OmniSistem Q Scan - Manual (Page 13)

(16) DMX Digital Value DMX Controller Fader 1
Generates patterns based on circle A orbiting circle B.
A circle is drawn that moves around the perimeter of another circle.
The 1st fader controls the size relationship of circle A against circle B.
The 2nd fader controls the speed of the first circle (A-frequency).
The 3rd fader controls the speed of the second circle (B-frequency).
The 4th fader controls the head start of Circle A (Phase).
The 5th fader controls the laser On/Off speed (Chop Frequency).
The 6th fader controls the laser On versus Off percentage (Chop Duty).
(24) DMX Digital Value DMX Controller Fader 1
Generates a horizontal fan using a sine wave.
A sine wave is drawn where X-axis is a linear ramp and Y-axis is a sine wave.
The 1st fader controls the horizontal size (X Size).
The 2nd fader controls the vertical size amplitude (Y Size).
The 3rd fader controls the sine wave frequency (Y Freq).
The 4th fader controls the display Y-axis center (Y Center).
The 5th fader controls the laser On/Off speed (Chop Frequency).
The 6th fader controls the laser On versus Off percentage (Chop Duty).