OmniSistem Q Scan - Manual (Page 14)

(32) DMX Digital Value DMX Controller Fader 1
Generates a horizontal fan using a linear ramp.
A horizontal line is drawn using a linear ramp with speed control and Y-axis positional step control and
vertical depth limits from the top.
The 1st fader controls the horizontal size (X Size).
The 2nd fader controls the horizontal sweep speed (X Freq).
The 3rd fader controls the vertical position step size (Y Step).
The 4th fader controls the vertical depth limit from top (Y Depth).
The 5th fader controls the laser On/Off speed (Chop Frequency).
The 6th fader controls the laser On versus Off percentage (Chop Duty).
(40) DMX Digital Value DMX Controller Fader 1
Generates a vertical fan using a linear ramp.
A vertical line is drawn using a linear ramp with speed control and X-axis positional step control and
horizontal width limits from the left.
The 1st fader controls the vertical size (Y Size).
The 2nd fader controls the vertical sweep speed (Y Freq).
The 3rd fader controls the horizontal position step size (X Step).
The 4th fader controls the horizontal width limit from left (X Width).
The 5th fader controls the laser On/Off speed (Chop Frequency).
The 6th fader controls the laser On versus Off percentage (Chop Duty).