Canon BJC-55 - Manual (Page 106)

3.
Read the confirmation, make sure Canon BJC-55 is selected, and
then click the OK button.
4.
Click the Close button.
5.
Click the “x” in the upper right corner to close the System Properties
window.
6.
Disconnect the USB cable from the computer.
7.
On the desktop, click the Start button, and then click Shut Down.
8.
Click Restart and then click the OK button.
After the computer has re-started, follow the procedure in Getting
Started to install the USB printer driver again.
Application Error or General Protection Fault
appears on the screen
An application error or general protection fault are Windows system
errors. For more details, see your Windows on-line Help.
Check to see if you are using Windows 3.1 application
software
If you use Windows 3.1 application software on Windows 98/Windows
95/Windows 2000, it may not operate correctly and could cause an
error. Use only Windows 98/Windows 95/Windows 2000 software
applications. Contact the software manufacturer and inquire about an
updated version of your Windows 3.1 software application.
Check to see if one of the following messages has been
displayed
Cannot execute print due to insufficient
memory.
Refer to the software application manual for the amount of memory
Windows
Windows
Windows
104 Chapter 6 Troubleshooting