Canon BJC-55 - Manual (Page 27)

Operation panel
Allows you to operate some functions. (☞26)
Auto Sheet Feeder ASF-50 connector
Connects the optional Auto Sheet Feeder ASF-50 to the printer.
Power connector
Connects the printer to the universal AC adapter.
Power lock switch
After the power lock switch is slid to the right ( : off position), you
can press the POWER button to switch the printer on and off. After the
power lock switch is slid to the left ( : on position), you cannot
switch the printer on, even if you press the POWER button. This
prevents the printer from being switched on accidentally while it is
being transported. Before transporting the printer, always slide the
power lock switch to the left. Otherwise, leave the power lock switch at
the right position so you can operate the
POWER button normally to
switch the printer on and off.
Battery pack
The Canon Li-Ion Battery LB-50 provides power to the printer when
the AC adapter is not connected. When the AC adapter is connected, the
printer is powered from the AC adapter. When the battery pack requires
recharging, the
CHARGE/ERROR lamp will light green. To recharge
the battery pack, connect the AC adapter to the printer and to a power
outlet. When the battery pack is fully charged, the
CHARGE/ERROR
lamp will go off.
Battery pack release
Push to the right to release the battery pack so you can remove it. Do
not remove the battery pack unless you are going to store the printer for
a prolonged period (three months or more).
Front cover
When closed, covers the battery pack. Folds down so you can feed
paper and other media to the printer. Open the front cover only when
you are feeding paper or other media into the printer.
Feed slot
Allows you to feed one sheet of paper or other media for printing.
Always align the left edge of the sheet with the left side of the feed slot.
25 Chapter 2 Setting Up the Printer
2