Canon BJC-55 - Manual (Page 146)

Cannot select the printer driver in the Chooser
Check the following items if you cannot select the printer in the
Chooser.
Make sure the printer is switched on
Make sure the printer is switched on and the POWER lamp is green. If
the green light is flashing, then printer is warming up. Wait few
moments for the printer to finish warming up. If the printer does not
switch on then see page 128.
Check the printer and the interface cable connections
Check the printer status and the connection of the printer interface cable
connections. (☞128)
Make sure that the printer driver has been installed correctly
There may be a problem with the printer driver. Uninstall it and install
the printer driver again.
The problem may exist in the printer driver. Uninstall the printer driver
and reinstall it. For details about uninstalling the printer driver, refer to
the Macintosh Printer Driver Guide. For details about installing the
printer driver, see Getting Started.
Make sure the server is switched on in the networking
environment
For details about setting up the printer for use on a network, see the
Macintosh Printer Driver Guide.
Determine if there is a problem with the networking
environment
Call the system administrator, for details about setting up the printer for
use on a network, see the Macintosh Printer Driver Guide.
Macintosh
Macintosh
Macintosh
Macintosh
Macintosh
Macintosh
144 Chapter 6 Troubleshooting