Canon EOS 60D User Manual

Page 140

Advertising
background image

140

Using Wireless FlashN

This shows the most basic setup for
fully-automatic wireless flash with one
Speedlite.
Steps 1 to 3 and 6 to 7 apply to all
wireless flash shooting. Therefore,
these steps are omitted in the other
wireless flash setups explained on
the pages hereafter.
On the menu screens, the <0> and
<1> icons refer to the external
Speedlite, and the <3> and <2>
icons refer to the built-in flash.

1

Press the <I> button to pop-up
the built-in flash.

For wireless flash, be sure to pop-up
the built-in flash.

2

Select [Flash control].

Under the [1] tab, select [Flash
control
], then press <0>.

3

Select [Built-in flash func.
setting].

Select [Built-in flash func. setting],
then press <0>.

4

Select [Flash mode].

For [Flash mode], select [E-TTL II],
then press <0>.

Fully Automatic Shooting with One External Speedlite

Advertising