Canon EOS 60D - Manual (Page 242)

242
wPrinting
In step 4 on page 240, select the printing
effect. When the <e> icon is displayed
brightly next to <z>, press the
<B> button. You can then adjust the
printing effect. What can be adjusted or
what is displayed will depend on the
selection made in step 4.
Brightness
The image brightness can be adjusted.
Adjust levels
When you select [Manual], you can change
the histogram’s distribution and adjust the
image’s brightness and contrast.
With the Adjust levels screen displayed, press
the <B> button to change the position of
the <
h >. Press the <U> key to freely adjust
the shadow level (0 - 127) or highlight level
(128 - 255).
kBrightener
Effective in backlit conditions which can make the subject’s face look
dark. When [On] is set, the face will be brightened for printing.
Red-eye corr.
Effective in flash images where the subject has red eye. When [On]
is set, the red eye will be corrected for printing.
e Adjustment of Printing Effects
The [ k Brightener] and [Red-eye corr.] effects will not show on the screen.
When you select [Detail set.], you can adjust the [Contrast],
[Saturation], [Color tone], and [Color balance]. To adjust the [Color
balance], use <
9 >. B is for blue, A is amber, M is magenta, and G is
green. The color in the respective direction will be corrected.
If you select [Clear all], all the printing effect settings will be reverted to
the default.