Canon EOS 60D - Manual (Page 142)

142
Using Wireless FlashN
This shows fully-automatic wireless
flash shooting with one external
Speedlite and the built-in flash.
You can change the flash ratio between
the external Speedlite and built-in flash
to adjust how the shadows look on the
subject.
1
Select [Wireless func.].
Follow step 5 on page 141 to select
[0:3] for [Wireless func.], then
press <0>.
2
Set the desired flash ratio and
shoot.
Select [1:2] and set the flash ratio
within 8:1 to 1:1. Setting a flash ratio
to the right of 1:1 (up to 1:8) is not
possible.
If the built-in flash output is not
enough, set a higher ISO speed
(p.88).
Fully-automatic Shooting with One External Speedlite
and Built-in Flash
The 8:1 to 1:1 flash ratio is equivalent to 3:1 to 1:1 stops (1/2-stop
increments).