Canon DR-1210C - Manual (Page 11)

Before Using the Scanner 7
Chapt
er 1
damaged power cord and AC adapter can lead to an accident, such as a fire
or electrical shock.
• Do not use the power cord while it is coiled.
• Do not pull directly on the power cord. When disconnecting the power cord,
grasp the plug and remove it from the outlet.
• Keep the area around the power plug clear of objects so that the power cord
can be disconnected easily in an emergency.
• Use only the AC adapter provided with this scanner. Also, do not use the AC
adapter provided with the scanner with any other electrical devices.
120 V model: 108-241250-US
220-240 V model: 109-241250-ES
• If you have any questions regarding the power supply, contact your local
authorized Canon dealer or service representative for further information.
Moving the Scanner
• Make sure to lock the lock switch when moving the scanner. Press the lock
switch to (Lock) position. (See illustration below.) When moving the
scanner, always hold it with both hands. The scanner weighs approximately
13.5 lb (6.1kg).
* Be sure to unlock the lock switch after moving the scanner. An error
message appears on the display panel if the scanner is used while the lock
switch is locked. (See p. 15 and p. 67.)
• Before moving the scanner, make sure to disconnect the interface cables and
AC adapter. If the scanner is transported with these items connected, the
plugs and connectors may be damaged due to excessive force applied to
them during movement.
Handling
WARNING
Note the following precautions whenever using the scanner.
Failure to do so may result in a fire or electric shock.
• Never use alcohol, benzene, paint thinner, aerosol sprays, or any
other highly flammable substance near the scanner.
Lock Switch
Lock
Unlock
Chap1.fm Page 7 Tuesday, January 10, 2006 4:49 PM