Canon DR-1210C - Manual (Page 63)

Appendices 59
Ch
ap
te
r 3
Cleaning the Scanning Glass and Contact Plate
If your scanned images contain lines or smudges, or if the scanned documents
are dirty, then the scanning glass or the contact plate inside the scanner may be
dirty. Clean them periodically.
1.
Carefully open the feeder.
2.
Use a clean dry cloth to wipe dirt off of the scanning glass and the platen glass.
There are two scanning surfaces, the flatbed (platen glass) and scanning glass
for scanning documents fed from the feeder. Make sure to clean both surfaces.
3.
Wipe the contact plate with a clean dry cloth.
Flatbed (Platen Glass)
Scanning Glass
DR-1210C.book Page 59 Monday, December 19, 2005 10:35 AM