Canon DR-1210C - Manual (Page 62)

58 Appendices
1. Regular Maintenance
Perform the regular maintenance described below to maintain peak scanning
quality.
CAUTION
• When cleaning the scanner or the inside of the scanner, turn
OFF the power switch and unplug the power cord from the
outlet.
• Do not use spray cleaners to clean the scanner. Precision
mechanisms inside the scanner may get wet and result in
malfunction.
• Never use paint thinner, alcohol, or other organic solvents to
clean the scanner. Such solvents can damage or discolor the
exterior of the scanner, or create a risk of fire or electric shock.
Cleaning the Scanner
Moisten a cloth with plain water, wring out the excess water, and then wipe the
exterior of the scanner to clean it.
Cleaning the Feed Path
Dust and paper particles in the document feed opening and inside the feed path
of the feeder may cause lines or smudges to appear on scanned images. Use
compressed air for regular cleaning of dust and paper particles from the
document feed opening and the inside of the feeder. After finishing a large
scan job, you should turn OFF the scanner and clean out any paper particles
that are remaining.
DR-1210C.book Page 58 Monday, December 19, 2005 10:35 AM