Canon DR-1210C - Manual (Page 52)

48 Using the Scanner
Prescan Function
• I want to preview the image before I scan it
For the ISIS Driver, check the [Prescan] checkbox. The preview window is
displayed when scanning starts.
See “ISIS Driver Settings k,” on p. 50.
For the TWAIN Driver, check the [Prescan] checkbox and click [Preview].
One sheet of the document is scanned, and the preview window is displayed.
See “ISIS Driver Settings j,” on p. 50, and “ISIS Driver Settings n,” on
p. 50.
Registering Settings
• I want to use preset scanning conditions again
Assign a name to the scanning conditions and register them as a user
preference. If you select the name of an already registered user preference,
the conditions you set overwrite the settings of the selected user preference.
See “ISIS Driver Settings a,” on p. 50, and “TWAIN Driver Settings a,”
on p. 52.
With CapturePerfect 3.0 Scan JOB function, the scan mode can also be
registered with the scanning conditions as a job, and scanning can be
performed by selecting the job and then executing the scan job.
DR-1210C.book Page 48 Monday, December 19, 2005 10:35 AM