Canon DR-1210C - Manual (Page 14)

10 Before Using the Scanner
2. Features of the DR-1210C Document
Scanner
The main features of the DR-1210C document scanner are described below.
„ Feeder Scanning
Scanning speed: 12 sheets/minute
Scanning conditions: LTR/A4, B&W/Gray/Color, 300 dpi
* Note that only one-sided scanning is available.
„ Flatbed (Platen Glass)
Documents that cannot be scanned by the feeder (e.g. thin paper, thick
paper, magazines, and bound documents) can be scanned on the flatbed.
„ USB 2.0 Interface
Connect the scanner to a computer with Hi-Speed USB 2.0 protocol.
„ Color/Grayscale Support
Documents can be scanned in 24-bit color or 256-level grayscale.
„ Job Function
Documents can be scanned automatically by pressing preregistered buttons
on the operation panel. Jobs are automatically processed by a preset method
without the need to start up an application.
„ Paper Size Detection
The size of scanned documents is automatically detected, and images of
non-standard size documents are saved with the unwanted margin around
the document removed.
„ Deskew
If a document is fed through the scanner as crooked, the scanned image is
corrected so that it is aligned as straight.
„ Advanced Text Enhancement
Documents with dark backgrounds or documents with faint text written in
pencil can be scanned clearly.
* Note that this function may not function effectively, depending on the
document type.
„ Color Smoothing Mode
This mode lessens the moire effect (a shimmering, wavy pattern) that may
occur when color documents such as magazine photos are scanned.
„ Dropout Color
This function enables the scanner to leave out (“drop out”) a specific color
in a document when scanning.
„ Remove Punch Holes
This function erases the black spots that appear on a scanned image from
documents that have had holes punched in them to be stored in a binder.
DR-1210C.book Page 10 Monday, December 19, 2005 10:35 AM