Canon DR-1210C - Manual (Page 57)

Using the Scanner 53
Chapter 2
Basic Setup Dialog Box
a User Preference
Name and save your settings.
)
The name can consist of up to 32
characters.
b Mode
Selects the scanning mode.
)
Selecting [24-bit Color] enables the
[Color Smoothing] settings in the
Advanced Settings dialog box.
c Page Size
Selects the size of the pages to be scanned.
)
Selecting [Auto-detection] enables
automatic page size detection when
scanning.
d Dots per inch
Selects the scanning resolution.
e Brightness
Adjusts the brightness of scanned images.
f Contrast
Adjusts the contrast of scanned images
)
[Contrast] is set automatically when the
Advanced Text Enhancement mode is
selected.
g Paper Source
Specifies the location of documents placed
on the scanner.
)
When [Auto] is selected, if a document is
detected in the feeder, that document is
automatically scanned. If no document
is detected in the feeder, documents are
scanned from the flatbed.
) When [Flatbed] is selected, documents
are scanned from the flatbed.
) When [Feeder] is selected, documents
are scanned from the feeder.
h Feeding Option
Selects the document feeding method.
)
[Standard Feeding] scans all loaded
documents when scanning is started
from the application program.
) [Panel-Feeding] scans all loaded
documents when scanning is started by
pressing the scanner’s scan button.
) [Automatic Feeding] starts scanning when
the feeder detects a loaded document.
i Prescan
When scanning starts, one document is
scanned and its image is displayed in the
Prescan window.
j Deskew
When a document page feeds at a slant,
the scanned image is straightened.
k Scanning Option
Specifies operation during scanning.
)
[Standard]:
After one page has been scanned and
ejected, the next page is scanned.
) [Scan Ahead]:
Scans document pages continuously.
) [Scan Single Page]:
Scans only one page.
Scan Area Dialog Box
l Page Size
Selects the size of the pages to be
scanned.
)
Click [Custom] to register a non-
standard document size as a custom
page size.
m Area
Specifies the area to be scanned.
)
These settings are disabled when [Auto-
detection] is selected for the page size.
Advanced Settings Dialog Box
n Edge emphasis
Enhances the contours in scanned images.
o Color drop-out
Enabled for all scanning modes except [24-
bit Color], this function selects skipping
(drop-out) or enhancement of red, green or
blue when scanning documents.
p Color Smoothing
When scanning photos from magazines or
catalogs with [24-bit Color] mode, you can
use this function to remove moiré patterns
from scanned color images. Selecting this
check box activates pixel averaging in
scanned images.
q Document Orientation
Specify clockwise rotation of scanned
images according to the orientation of
documents to be scanned.
r Border Removal
Removes the black border that may be
created around scanned images.
s Punch Hole Removal
Removes the black holes created in
scanned images when scanned documents
have holes punched for binding.
t Reverse Image
When the [Black and White], [Error
Diffusion] or [Advanced Text Enhancement]
mode is selected, black and white are
reversed in the scanned image.
u Text Orientation Recognition
Detects the text orientation in scanned
images and rotates the images in 90°
increments to normalize text orientation.
v Rapid recovery system
Select this function to prevent error
reporting to the application program when
feeding is interrupted due to a paper jam or
similar error while scanning. After fixing the
cause of the interruption, scanning can be
quickly resumed with standard operations.
This Quick Guide describes the TWAIN driver
settings. Click the Help button for details.
DR-1210C.book Page 53 Monday, December 19, 2005 10:35 AM