User manual, English – XMART Optima 10K 2PH User Manual

Page 31

Advertising
background image

User Manual

- UPS ONLINE 6K/10K 2Ph

ENGLISH

_____________________________________________________________________________________________________________________

20140714_ 6K-10K 2PH (EN)

- 31

UPS FRONT PANEL: LED INDICATOR LIGHTS

There are 4 LED indication lights in front panel, located below LCD. These 4 LEDs describe UPS condition as follow:

MODE

Bypass

Line

Battery

Fault

UPS is in Auto-check mode

BYPASS Mode

NORMAL Mode

BATTERY Mode

BATTERY TEST in progress

ECO Mode Activated

UPS in Failure

LED = ON /

LED = OFF


UPS FRONT PANEL: LCD

This UPS has a sophisticated LCD able to display all important information related to input line, UPS status and values,
operation mode and error and alarm messages. It is a powerful information tool to know what is happening at any moment.
LCD is also the configuration interface for all configurable parameters.



















1.- BATTERY INFORMATION: In this section is displayed battery charging level and battery alarms/error icons.

2.- ELAPSED TIMER:
When UPS switches to battery mode, elapsed time during battery mode is displayed in
Hours/Minutes/Seconds.

3.- ERROR / ALARM CODE: In case of alarm or error, 2 digits code is displayed in this section to describe the kind of error or
alarm. Revise error and alarm codes tables in this manual.

4.- BEEP STATUS: It shows if audible alarm buzzer is active or muted.

5.- LOAD INFORMATION: In this section is displayed load value connected to UPS by 4 segments displays:
(0-25%), (25%-50%), (50%-75%) and (75%-100%). It also shows error and alarm icons related to UPS output.

6.- UPS MODE: All possible UPS modes are indicated by this section in graphic way.

7.- INPUT / OUTPUT VALUES: Input and output voltage and frequency values can be monitored in this LCD section. In battery
mode this section shows battery DC voltage.



Advertising
This manual is related to the following products: