Nortel Networks NN42030-101 - Manual (Page 26)

Installing your MCC 31 00 for BlackBerry
c. Scroll to a load, and highlight the Installable link.
5. Select Menu, Get Link.
6. Click Download.
7. Click Yes at the upgrade prompt.
8. Select licensing and security boxes that might appear during the
installation.
9. Restart your BlackBerry if prompted.
10. If you receive an error message (such as MCC3100_BB-3 not found)
when you attempt to start the MCC 3100 for BlackBerry, you must
reinstall the software.
Note: The upgrade procedure retains application data. To remove the
data associated with the previous version of the application, clear the
database the first time you run the upgraded application. For more
information about uninstalling the database, see “Clearing the
MCC 3100 for BlackBerry database” on page 27.
Performing an upgrade for a major release
Follow this procedure to upgrade from one major release to another.
Upgrading MCC 3100 for BlackBerry for a major release
1. Record your configuration in the following table.
Table 3: Upgrade configuration parameters
Parameter Value
Username
Password
Primary MCG 3100 Address
Network Connection (if available)
Mobile Contact
2. Install the new version of the client using the instructions in
“Installing MCC 3100 for BlackBerry from a computer” on
NN42030-101 MC 3100 3.1 Standard 04.03 November 2009 26