Nortel Networks NN42030-101 User Manual
Page 48
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Figure 4: Splash screen
Note: The first time you start the MCC 3100 for BlackBerry, a warning
appears stating that the application has requested an HTTP
connection.
2. Select Allow this connection for All HTTP connections.
Note: If you accidentally select Deny this connection, any further
connections are refused. To solve this, select Options, Firewall,
Reset Settings.
3. If prompted, enter your configuration settings. For more information
about configuration settings, see “Initial configuration” on page 31.
Note: Startup time and ongoing performance of the MCC 3100 for
BlackBerry are dependent on the available system resources.
Exiting the MCC 3100 for BlackBerry application
Normally, there is no need to exist the MCC 3100 for BlackBerry
application. You can leave the application running for the entire time that
the mobile device is turned on. You must, however, exit before performing
software maintenance tasks.
NN42030-101 MC 3100 3.1 Standard 04.03
November 2009
ons
48