Nortel Networks NN42030-101 - Manual (Page 71)

Advanced functions
Swapping a call between two parties
1. While in a call, select Menu, Mid-Call Feature.
2. Dial the number of the second party.
3. Select Menu, Hold & Call. The first party is placed on hold and hears
music, if available on your system.
4. After the second party answers the call, press Swap to alternate
between the two parties.
Three-party conference call
Hold three-party conference calls using the MCC 3100.
Holding a three-party conference call
1. While in a call, select Menu, Mid-Call Feature.
2. Dial the number of the second party.
3. Select Menu, Hold & Call.
The call is placed on hold.
4. After the other party answers, request permission to initiate the
conference, and then select Menu, 3-way Conference Call.
Note: You can use dialpad controls (for example, *5) while you are in
a three-party conference. However, if any of the participants are in a
second conference, the dialpad controls are no longer available.
Device handoff
Device handoff requires a Handoff key on your desktop telephone. If you
do not have this key configured, contact your system administrator.
Moving a call from the desktop telephone to the MCC 3100
You can move a call from your desktop telephone to the MCC 3100.
1. While a call is connected on the desktop telephone, press the
Handoff key.
2. Answer the call on the MCC 3100.
3. Hang up your desktop telephone.
Nortel Mobile Communication Client 3100 for BlackBerry User Guide 71