Threading, Threading the machine – SINGER 1030 Creative Touch User Manual

Page 15

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

threading the machine

THREADING

• Raise take-up lever to its highest position by

turning hand wheel toward you. Raise

presser foot to release the tension discs.

1. Lead thread from spool holder and snap it

down into thread guidepost A.

2. Raise console cover and thread the rear thread

guide by holding thread in left hand and guiding

it over wing B and into channel C.

3. Draw thread firmiy between tension discs,

down right-hand channel, and up left-hand
channel.

4. Thread take-up lever D by guiding thread

down over top of lever and then up Into
eyelet.

5. Lead thread from take-up lever down into

ieft channel and then Into lower thread

guides E and F.

• Thread the needie using the needle

threader. Refer to page 10 for instruc­
tions on using the needle threader.

Advertising
This manual is related to the following products: