Removing stitching from fabric, Removing the chainstitch accessories – SINGER 1030 Creative Touch User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing the Stitching
REMOVING STITCHING FROM FABRIC
Chainstitching can be removed smoothly and
cleanly in seconds by freeing the last stitch
formed in the fabric.
1. Simply cut the last loop formed on the un
derside of the fabric.
2. Pick up the free thread end from the top of
the fabric.
3. Puli the free thread end, removing entire
line of stitching.
Cutting Last Loop
REMOVING THE CHAINSTITCH
ACCESSORIES
• Raise take-up lever to its highest position
and raise presser foot.
• Open slide piate and remove the straight-
stitch plate.
• Move bobbin latch to left and lift out the bob
bin-case insert by pushing down post and
lifting insert out on an angie.
• Replace bobbin and zig-zag or straight
stitch plate (see page 5). Close slide plate.
•
• Unthread chainstitch eyelet in take-up lever
and rethread for regular sewing.
Picking Up Free Thread End
Post
Removing Line of Stitching
Removing Straight-stitch Plate
after Chainstitching
33