Adjusting stitch balance when using, Patterns, Flexi-stitch – SINGER 1030 Creative Touch User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
finding the beginning
of a pattern unit when
using a buiit-in stitch
To start stitching one of the built-in Fashion
Stitch or Flexi-Stitch disc patterns at its begin
ning, align the start indicator on the disc
holder with the pattern-start indicator on
the machine.
To align both start symbols:
• Unthread the needle.
• Hold needle and bobbin thread ends.
• Run the machine until both symbols are
aligned.
• Release the threads.
• Thread the needle and start to sew.
Symbols
Finding Pattern Start
When Using a Built-in Stitch
adjusting stitch balance
when using
Flexi-Stitch
patterns
When using a Flexi-Stitch pattern, you may
need to adjust the stitch-balance dial to cor
rect the appearance of the stitch.
Before you move the stitch-balance dial from
its neutral position, make a test sample. If ad
justment is required, stitch slowly and move
the stitch-balance dial as you sew.
- i
I A/w\'
Incorrect
<W<<<<<<<<<<
Correct
Incorrect
Turn the dial slowly to left (♦wwi symbol) to
bring forward and reverse stitches of the
pattern together.
Turn the dial slowly to right (
mm
-»symbol) to
separate forward and reverse stitches of the
pattern.
23