Adjusting width of button opening, Adjusting length of button opening – SINGER 1030 Creative Touch User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Adjusting Width of Button Opening
The width of the button opening is regulated
by the stitch-width dial.
• To make button opening wider, turn diai very
slightly toward the 1 setting.
• To make button opening narrower, turn dial
very slightly toward the 2 setting.
Adjusting Width of Button Opening
Adjusting Length of Button Opening
The length of the button opening in one-step
buttonholes is controlled by the button-carrier
clamp. If the button will not pass through the
button opening of your test buttonhole, remove
the button from the carrier and slide clamp for
ward to a new setting. Use the gauge lines {Vs
inch apart) on the carrier to set length and
stitch buttonhole without a button in the car
rier.
Adjusting Length of Button Opening
When Using One-step Foot
39