Setting pattern selector, Adjusting stitch placement – SINGER 1030 Creative Touch User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SETTING PATTERN SELECTOR
Turn pattern-selector release lever to\ward
you until It locks In place. Then turn pattern
selector until pointer on panel is above
desired stitch.
NOTE: If pattern-selector release lever fails
to lock, turn hand wheel slightly toward you
and reset lever. Do not attempt to turn the
release lever after It is locked in place. It will
reposition itself when you start the machine or
turn hand wheel.
i A r <
Setting Pattern Selector
ADJUSTING STITCH PLACEMENT
Needle-position setting places the nee
dle in center stitching position. Settings
J» and J, place the needle in left and right
stitching position at stitch widths less than 5.
Center setting is used most often. Right
^ is required for buttonholing and left J.for
button sewing or ^setting can be used for
placing narrow zig-zag stitching to the left or
right of center in decorative work.
To set needle position, turn ring until desired
setting is aligned with indicator line on ring.
21