Attaching biindstitch hem guide – SINGER 1263 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing and Replacing the
Button Foot and Presser Foot Shank
• Raise needle to highest position by turning the hand
wheel toward you.
• Raise the presser foot.
• Loosen presser foot screw A and remove the shank
B, guiding it to the right.
• To replace the accessory, hook shank around the
presser bar and tighten the presser foot screw.
NOTE: Insert the edge of a coin in the seat of the
presser foot screw to loosen Hand tighten it securely.
Attaching Biindstitch Hem Guide
• Raise presser foot, loosen presser foot screw and
slip biindstitch hem guide between screw and shank
of the general purpose foot.
• Be sure underside of the guide clears the slide plate
and front of foot.
•
• Tighten screw with a coin.
10