Twin-needle stitching, Procedure, Twin-needie stitching – SINGER 1263 User Manual
Page 69
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
7. Twin-Needle Stitching
Twin-needle sewing capability has been built into this
sewing nnachine. The twin-needle simultaneodsly
produces two parallel, closely spaced lines of pattern
stitching. You can stitch with either one or two colours
of thread.
Stitch: Pattern desired
Needle Position: X. IS JL only
stitch Width:
I] | 11 f ^ onlyf
Stitch Length: .5-4 to suit fabric
Generai Purpose Needie Piate
General Purpose Foot
tCAUTION:
Do not use a stitch width greater than
what is recommended. A wider stitch wiii resuit in
needie breakage.
Procedure
• Insert twin-needle.
• Thread as for single-needle stitching,
except
pass
thread between
centre
and
back
tensbn discs A,
and through eye of
ieft
needle.
• Insert a second spool pin Into hole on the top cover
of nnachine, as illustrated.
• Place second spool of thread on right spool pin
and felt.
• Thread machine in usual way,
except
pass thread
from second spool between
centre
and
front
ten
sion discs B, as shown.
• Thread through remaining points, making certain
to
omit the thread guide above the needle
and pass
thread through eye of
right
needle.
68