Face plate area, Bobbin and feed areas, Exterior areas – SINGER 1263 User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Face Plate Area
To clean | and oil 4 the front interior of machine,
remove screw from face plate. With a soft cloth or lint
brush, clean and oil points indicated by arrows. Re
place face plate and screw.
Bobbin and Feed Areas
To clean bobbin and feed areas, remove needle plate,
as instructed on page 12. Remove bobbin case as in
structed on next page. Using soft cloth or brush, clean
area as illustrated. Replace needle plate and bobbin
case, as instructed on page 12 and 64.
Exterior Areas
If necessary, a mild solution of soap and water may be
used on exterior areas to remove stubborn stains. No
other cleaning liquid or powder should be used.
CAUTION;
Do not attempt to adjust the motor belt
Contact your nearest Service Centre should any ad
justment be required.
62