Changing needle reemplazo de la aguja – SINGER W312 Classic User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CHANGING NEEDLE
REEMPLAZO DE LA AGUJA
FABRIC-THREAD-NEEDLE-TABLE
Please pay attention to the following list as a guide for sewing different types of fabric.
1. Raise the needle bar to its highest position.
2. Loosen needle clamp screw and remove the old needle.
3. With the flat side of the needle facing away from you, insert the needle as far
up as it will go.
4. Tighten the needle clamp screw securely.
1. Ponga la aguja en la posición más alta.
2. Afloje el tornillo de la abrazadera y quite la aguja vieja.
3. Con el lado plano de la aguja hacia la parte posterior, coloque la aguja tan
arriba como sea posible.
4. Apriete muy bien el tornillo de la abrazadera.
20
21