SINGER 201K User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
NEEDLES AND THREAD
This machine uses a 15x1 Needle—available
in sizes 9, 11, 14, 16, 18, 19 and 21.
For perfect stitching, the thread should be selected
according to the fabric to be stitched and the
needle must be of the correct size for the thread
which must pass freely through eye of needle.
Select the correct needle according to the chart
on page 11. Be sure that the needle is not blunt
or bent.
TO SET THE NEEDLE
Raise needle bar to its highest position and loosen
thumb screw A in needle clamp. Insert needle
with its flat side to the left up into the needle
clamp B as far as it will go, then tighten thumb
screw A.
Flat
Side
Fig, 9, Setting the Needle,
10