SINGER 201K User Manual
Page 20
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TO START SEWING
See Fig. 19.
Be sure to have thread take-up lever 5, Fig. 10 in
its highest position.
The throat plate has guide lines for seam width gauged
from centre of needle hole, and cross lines for gauging
square corners.
Pla ce material beneath the presser foot G, turn the
hand wheel to bring the point of the needle into the
material, then lower the presser foot by means of
presser bar lifter J, and start to sew.
Some materials, such as soft finished sheers, nylons,
jerseys, tricots and other elastic and spongy textiles,
require a slight amount of assistance in feeding during
sewing operations.
However, too much pull will stretch the seam, create
irregular stitching and bend the needle. Most
materials require only guiding for best sewing results,
«
Fig. 19. To Start Sewing.
I*'"'
1^: "
18