SINGER 201K User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Corded Welting
Cable cord comes in a variety of sizes and wben covered with a firmly woven fabric
makes a corded welting that is an excellent seam finish.
This welting is prepared in advance and then stitched into the seam. Cut a true bias
strip
154
inches wide, plus three times the width of the cord of either self or contrasting
fabric. Sew strips together on the lengthwise grain to obtain desired length.
^-Adjust zipper foot to left side of needle.
.
raw edges
Encase cord in bias strip,
even.
Lower presser bar.
Stitch close to cord, using a stitch
length slightly longer than for plain
seaming of same fabric.
Do not crowd stitching against cord.
48