SINGER 201K - Manual (Page 43)

Occasionally apply a drop of oil to parts
in movable contact.
THE RÜFFLER
DRIVING
LEVER
ADJUSTING FINGER
ADJUSTING
LEVER
ADJUSTING
SCREW
SEPARATOR RUFFLING
BLADE BLADE
SEPARATOR
GUIDE
This attachment offers a simple and
effective way to make gathered and
pleated ruffles.
Ruffles may be made separately or
made and applied at the same time.
The ruffler is attached to the machine
in place of the presser foot.
41
1. The adjusting lever sets the ruffler for
gathers or pleats. The number 1 space
setting is for gathers, and places fullness
at every stitch. Numbers 6 and 12 are
space settings for pleats, spacing them
either 6 or 12 stitches apart. The star is
for plain stitching, and is used when
grouping gathers or pleats.
2. The adjusting finger is used only for
pleating and affects the width of the pleat.
It is thrown out of action by bringing it
out of contact with the adjusting screw
located at the right of the ruffler,
3. The adjusting screw regulates the
fullness of gathers or pleats. When turned
in (clockwise) to its limit with jhe adjust­
ing finger in place, the attachment is set
for its deepest pleat. When turned out
(anti-clockwise) to its limit and the
adjusting finger out of action, the ruffler
gives only a hint of fullness.
Activating Parts
The ruffling blade and the separator
blade are of blue steel and hold the
material to be gathered between them.
Adjusting Points