SINGER 201K - Manual (Page 14)

UPPER THREADING
K4SQ6
See Fig. 10.
Raise take-up lever 5 to its highest point.
Place spool of thread on spool pin.
Lead thread into thread guide 1.
Down and from right to left between
tension discs 2.
Into the loop of the take-up spring 3 and
to the right until it enters the fork 4.
Up and from right to left through hole
in take-up lever 5.
Down through guide 6 on face plate.
Down through guide 7 into guide 8.
From right to left through the eye of the
needle.
Draw about two inches of thread through
the eye of the needle with which to
begin sewing.
Fig. 10.
12