Cording/sewing in zipper, Insert cording, Zippers – SINGER W426 User Manual
Page 25: Quilting, Cording/sewing on zipper quilting
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CORDING/SEWING IN ZIPPER
• INSERT CORDING
(A) Fold bias strip of fabric over
screw on the back of cording/
zipper foot and set the foot to
the left of needle.
(B) Sandwich the welting between
two layers of fabric with right
sides together. Stitch a second
time with cording/zipper foot
to the right of needle so that
the needle stitches close to the
cord through all thicknesses.
Swing the foot to left, or right of
the needle as needed so that the
foot sews very close to zipper teeth.
Parallel straight lines are easy to
sew with the quilting guide. To
attach the guide, loosen thumb
screw and slip the U-shaped holder
of the guide between presser foot
screw. Tighten the
thumb screw securely. Adjust the
curved bar to the desired distance
from the needle. Sew the first line
of stitching as desired, then, for the
let the guide
follow along the previous stitch
line. A straight stitch, zigzag, or any
other stitch may be used.