Narrow hemmer – SINGER W426 User Manual

Page 46

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

background image

to the


With needle at its highest position replace re­
gular presser foot with narrow hemmer and ti­
ghten it securely in place. Set stitch pattern se­

lector of model 426 or blind stitch selector of


415 at mannual or M position. Zigzag

stitch width control at 0 for straight stitched
hem or at number 3 for zigzag stitched hem. Set

stitch length control to suit.

For a plain narrow hem make a 1/8 inch double

fold for about two inches along edge of fabric.

Hold each end of the two inch fold, slip

underneath hemmer. Bring fold up into the scroll

of hemmer, draw fabric forward to end and
fasten with point of needle. Lower presser bar

lifter. Gently pull end of thread as you start

Guide material slightly to left and it will take a
double turn through scroll.

- • . i

The narrow hem provides an excellent finish for
edges of ruffles or any other dainty work.

This manual is related to the following products: