Twin needle- upper threading and sewing – SINGER W951 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TWIN NEEDLE- UPPER THREADING AND SEWING
1- Be sure zigzag needle plate and presser foot are in place.
2. Use only left needle position. Use ne«jles White Part #80999.
3. Follow threading instructions for single needle with these ex
ceptions:
A - Place thread, matching or contrasting in color, on both
spool pins.
B - Pass threads undw handle and through arm thread guide
"16" (Fig. 1) one thread per hole.
C - Down around tension discs with one thread passing
between the back discs and the other between the front
discs.
D - Now treat both threads as one, until you reach the needle
eye.
E - Pass one thread through each needle eye.
Set right hand zigzag width stop at start of red area (left hand side).
Zigzag lever in red area will br^k needle.
5. Straight stitching and decorative stitch designs can be produced in
the same manner as followed for single threading.
VvV^Jm^A^A^/VV^/№^M/A/v^A/'#WVV^AAAAAiiV'WAAAVVVi\AAAAA/WV\MA'AAAAV'^AA*VVW
/'v^A^/A«A/.,yVVVV^A^#/'vVAVVW\A'MA/'A'WW^vWW/v^W-УV''#A^vWA^/V^A.^A/^/vV^/VV'v*«iV'/^yW
Fig. 35
18