Edgestitcher, Attachment foot, Edgestitcher -38 – SINGER W951 User Manual
Page 38
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Fig. 73
EDGESTITCHER
The edgestitcher is used in making dainty
lace insertions, edgings and piping.
The slots in the edgestitcher serve as guides
in sewing together various pieces of material.
If you want to sew lace, lace and embroidery,
or lace and tucked strips together, place the
pieces of material that will be on top in slot 1
(Fig. 75) and the lower fabric in slot "4'.' For
instance, if you are sewing lace edging to a
finished edge of fabric place the fabric in slot 1
and the lace in slot "4" (Fig. 74).
ATTACHMENT FOOT
In order to attach the binder, edgestitcher and the hemmers, it is
necessary to remove the presser foot and replace it with the attachment
foot. (Fig. 73).
Mount binder, edgestitcher or hemmers, sliding the attachment to
the left as far as possible and tighten screw.
The mounting slot enables you to sew as close to or as far away from
the edge as desired. Just move the attachment to the correct position
before tightening the mounting screw.
Fig. 74
■ 37