Blind stitch pattern number "1, Make blind hem as follows – SINGER W951 User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Blind stitch pattern number "1"
Make blind hem as follows
(1)
Use standard zigzag foot (Fig. 38)
(2)
Set stitch length control "4" (Fig. 1) at about "2-1/2".
(3)
Set pattern indicator for blind hem stitch d^ign number "1".
(4)
Zigzag width lever to suit material being sewn — the lower the number, the
smaller the sidewise stitch.
Blind stitch hems provide a durable hem finish that is almost invisible
and comparable to hand sewing.
Prepare the garment in the same as for hand hemming.
STEP
STEP
COMPLETED
Fig. 39
Step 1. (Fig. 39) If hem with folded edge is used make first fold 3/8" deep.
Step 2. Turn hem to the depth desired and baste 1/4" from upper edge. Press in place.
Step 3. Fold hem back toward right side of garment leaving 1/4" extended.
Step 4. Place material under pre^r foot, sew with stitch length set to suit matwial being sewn and make a side wise
stitch about every 3/4" of an inch of sewing.
- 2 0 -