Cleaning and oiling the shuttle – SINGER W951 User Manual
Page 29
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
care
and
maintenance
of
your
machine
CLEANING AND OILING THE SHUTTLE
The stitch forming mechanism occasionally becomes clogged with loose threads and lint. This will interfere with
the efficient operation of the machine. Cleaning should be done with a small brush, never with a sharp or pointed tool.
To remove the stitch forming mechanism, proceed as follows;
1. Turn hand wheel until the needle reaches its highest position. The mechanism will assume the position illustrated
in {Fig. 63). Tilt head back on its hinges.
2. Remove bobbin case “E".
,
„
3. Turn the two shuttle race cover clamps "C" outward and remove the shuttle race cover B and shuttle A .
4. Clean the shuttle race, shuttle and shuttle race cover by removing all threads, lint, etc.
5. Apply a drop of oil with finger tip to outer edge of shuttle.
(0 SHUTTLE f
DRIVER
©BOBBIN CASE
\
® SHUTTLE
‘ BODY
SHUTTLE
RACE COVER
© BOBBIN
SHUTTLE RACE COVER
0SHUTTLE BODY @
shu
TTLE
/ RACE
/
COVER
CLAMPS
'C'-SHUTTLE RACE
COVER CLAMPS
Fig. 63
Fig. 64
28
,