The adjustable cording and zipper foot, Sewing in a zipper – SINGER W951 User Manual
Page 28
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THE ADJUSTABLE CORDING
AND ZIPPER FOOT
This attachment is used to make and
insert covered cording, and to sew in zippers.
Loosen thumb screw to slide foot to either
right or left of needle.
CORDING. Fold bias strip of fabric
over cord. Loosen thumb screw and set
foot so needle is centered in needle hole.
Machine bastes cord in place (Fig. 61).
Fig. 60
Fig. 61
V.-: ^
r^P
Fig. 62
To sew covered cord to material, reset adjustable foot so needle
stitches closer to cord, and on edge of base fabric.
SEWING IN A ZIPPER
Loosen thumb screw and slide foot so needle enters center of
needle hole. Guide metal of zipper along edge of foot (Fig. 62).
Stitching should be close to zipper to allow easy opening and closing.
Adjust to sew from either right or left side, whichever is more
convenient.
27