SINGER W951 User Manual
Page 39
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Be sure to draw the lace and material under the needle and back of the edgestitcher so that the feed will carry it backward
as you stitch. Hold the fabric in the left hand the lace in the right, being sure the fabric overlaps the lace slightly.
Rick-rack can be sewn to the edge of the material in the same manner.
To trim with wide piping, place the fabric in solt"4,"and the fold of the piping to the left in slot 3, for a narrow piping
place fabric in slot 2 and the folded edge of the piping to the right in slot 3.
Slot 5 may be used as a guide in stitching a French seam.
See Fig. 76, 77, 78 and 79 for suggestions on how to use the edgestitcher. There are hundreds of other uses.
Fig. 76
Fig. 77
Fig. 78
Fig. 79
38