Datalogic Scanning Jet - Manual (Page 23)

CONNECTIONS
2
2 CONNECTIONS
2.1 PDA CONNECTION TO THE HOST COMPUTER
2.1.1 RS232/USB Direct Connection
You can use a cable to connect the Datalogic Jet™ PDA to a host computer to
transfer data.
Key:
A Host computer C RS232 cable or USB cable
B Datalogic Jet™ PDA D *Power Supply (only necessary for battery charging)
* Recommended Power Supply: PG12-10P35 AC/DC Power Supply
CAUTION
If the PDA supports Windows Mobile, before plugging the RS232
cable you have to check the 'COM1 Enable' option on the 'System
Configuration' window. (Start -> Programs -> System
Configuration).
CAUTION
USB communication may not be completely guaranteed while
batteries are simultaneously in charge. Avoid the power supply
connection when the USB link is active.
7