Datalogic Scanning Jet - Manual (Page 26)

DATALOGIC JET™
2
2.1.3 WPAN Connection
Datalogic Jet™ PDAs can communicate with a Bluetooth
® device, such as a printer,
within a range of 10 m, using the on-board Bluetooth ® module.
A
B
Key:
A) Datalogic Jet™ PDA
B) Bluetooth®
printer
NOTE
In order to avoid wasting energy, the Bluetooth® module is off by
default. If you need to have Bluetooth® working, the module must be
powered on using the Wireless Communications applet (see par.
3.7.4), and perform the Discovery procedure (see par. 3.8.2).
The Blue LED flashing signals that the Bluetooth® module is on.
NOTE
Suspending the terminal powers off the Bluetooth radio and drops
the piconet (Bluetooth connection). When the terminal resumes, it
takes approximately 10 seconds for the Bluetooth radio driver to re-
initialize the radio.
10