Datalogic Scanning Jet - Manual (Page 91)

MAINTENANCE
4
NOTE
In order to guarantee an adequate operating autonomy, when
replacing the battery pack the PDA checks the battery energy level.
If the battery is not sufficiently charged, Datalogic Jet™ does not
turn on (when pressing the ON button).
In this case, either substitute the battery pack with a charged one
(sufficiently charged) or insert Datalogic Jet™ into a powered cradle
or plug it into the direct power supply.
NOTE
To achieve the best battery life, turn off the radios not in use.
4.3 CLEANING THE PDA
Periodically clean the Datalogic Jet™ PDA with a slightly dampened cloth.
Do not use alcohol, corrosive products or solvents.
75