Datalogic Scanning Jet - Manual (Page 76)

DATALOGIC JET™
3
3. Tap on the “Me” button to enter the related window; then, tap on the “ON” button
to activate the Bluetooth ® module. The module activation may be also performed
by using the WIRELESS COMMUNICATION applet as described in par. 3.7.4.
By tapping on the “HW Details” and “SW Details” buttons, information about the
PDA Bluetooth
® hardware and software will be displayed, while the “Enable
Encryption” button starts encryption of the Bluetooth ® communication data. If
tapping on the “Close” button the Bluetooth ® Manager Device window will be
closed.
4. Tap on the “Discovery” button to enter the related window; then, tap on the
“Scan” button to run the Discovery procedure:
60